18 Safety
CFPP Process Analyzer CFPP-4.2 03/2016
2.7 Personal Protective Equipment
When you carry out work on the analyzer, you must wear the following protective
equipment:
• Protective clothing
• Protective goggles
When dealing with dangerous substances, e.g. during maintenance work, you must wear
the following additional equipment:
• Appropriate protective gloves (see safety data sheet for the particular
substance)
• Appropriate breathing protection, if required, according to the safety
data sheet for the particular substance
For further information, please refer to the safety data sheet for the respective substance.
2.8 Potential Dangers and Risks
The analyzer conforms to the current state of the art. However, there is still a remaining
risk.
The analyzer operates with electrical power.
GER!
Dangerous electric current!
If you touch components carrying electric current, the electrical power can
cause serious injury or death.
FOR THIS REASON:
- Before cleaning or carrying out maintenance or repair work, switch
off all main control switches and secure them, so that the system
cannot be switched on accidentally.
- Work on electrical equipment must be carried out by qualified
personnel according to chapter 2.6.
- Do not remove or disable any protective devices.
To Next Page
Loading...
General
