24 Introduction
CFPP Process Analyzer CFPP-4.2 03/2016
3.1 The CFPP Process Analyzer CFPP-4.2
Fig. 3.1: The CFPP Process Analyzer CFPP-4.2
The analyzer CFPP-4.2 measures the cold filter plugging point (CFPP, temperature limit
value for filterability) online in a fully automated process. The measuring range is from -
35°C to +10°C. A sample stream and a calibration stream can be connected (additional
components required).
The analyzer carries out measurements according to the standards for measuring the CFFP
in the laboratory. The test filter corresponds to the test filter used in laboratory analysis.
The measuring cell is made of transparent material and allows you to observe the analysis
process directly. The control unit with integrated industry standard PC provides various
possibilities for communication and configuration.
Additionally, the analyzer can be equipped with:
• Sample conditioning system
• Cooling system for the control box for problematic environmental
conditions
• Validation system
• Recovery system
• Automatic sampling
To Next Page
Loading...
