40 Analyzer Description
CFPP Process Analyzer CFPP-4.2 03/2016
5.6 Further Options
Cooling of the control box
If ambient temperatures are high, the temperature inside the control box can rise beyond
the permitted limit value. To prevent this, the housing can be equipped with a cooler, for
example a vortex cooler.
Validation system
The standard validation system consists of a container, a pump, one or several valves, and
further components. The valves are either actuated manually or controlled via the PACS
analyzer process software.
Recovery system
A recovery system collects the product which flows into the drain line of the analyzer, for
further processing. The system consists mainly of a container, a pump, valves, sensors
and a separate control unit.
Automatic sampling
The analyzer can be equipped with additional valves, switches and sensors which allow
automatic taking of samples. The PACS process control software controls the sampling
system, which fills a sampling container with a sample of the current product on request.
Explosion-proof chiller for liquids
The liquid chiller supplies cold cooling medium for the heat exchanger in the sample
conditioning system (see Fig. above, pos. 8) and for any additional heat exchangers that
may be installed. For more detailed information on the explosion-proof chiller for liquids,
please refer to the supplied operation manual.
To Next Page
Loading...
General
