Analyzer Description 33
03/2016 CFPP Process Analyzer CFPP-4.2
Note: Further information to the Chiller for Liquids you find in the manual for the
Chiller for Liquids.
Most of the fluid technology components are located inside the measuring unit enclosure
(2).
The power supply box (11) contains the terminals for connecting the power supply,
contactors and the APEX control unit. It is required for the pressurization of the control
box and the measuring cell housing.
The signal junction box (10) contains terminals for connecting the signal lines.
You operate the analyzer with the touch-screen (4) and the pen (5).
The overpressure control display (7) provides information on current operating states and
parameter settings of the overpressure control system.
By means of the key switch (6) ("bypass switch"), you can activate or deactivate the
explosion protection (overpressure monitoring) for the pressurized control box (8) and the
measuring cell housing (15).
To Next Page
Loading...
