Basler A102f - Page 91

Configuring the Camera
BASLER A102
f 4-29
DRAFT
* If a bit is set to 0, the camera does not support this color coding ID in Format 7 Mode 0.
If a bit is set to 1, the camera supports this color coding ID in Format 7 Mode 0.
Register Name: Color Coding Inquiry
Offset from Base Address: 0x014
Field Name: Bit Description A102f
Value *
A102fc
Value *
Mono 8
0 Y only, 8 bits, non-compressed
(ID = 0)
1 1
4:1:1 YUV8
1 4:4:1 YUV, 8 bits/component, non-compressed
(ID = 1)
0 0
4:2:2 YUV 8
2 4:2:2 YUV, 8 bits/component, non-compressed
(ID = 2)
0 1
4:4:4 YUV 8
3 4:4:4 YUV, 8 bits/component , non-compressed
(ID = 3)
0 0
RGB 8
4 RGB, 8 bits/component, non-compressed
(ID = 4)
0 0
Mono 16
5 Y only, 16 bits, non-compressed
(unsigned integer)
(ID = 5)
1 0
RGB 16
6 RGB, 16 bits/component, non-compressed
(unsigned integer)
(ID = 6)
0 0
Signed Mono 16
7 Y only, 16 bits, non-compressed
(signed integer)
(ID = 7)
0 0
Signed RGB 16
8 RGB, 16 bits/component, non-compressed
(signed integer)
(ID = 8)
0 0
Raw 8
9 8 bit, raw data output from a color filter sensor
(ID = 9)
0 1
Raw 16
10 16 bit, raw data output from a color filter sensor
(ID = 10)
0 1
---
11 ... 31 Reserved --- ---