Basler A102f - Page 92

Configuring the Camera
4-30 BASLER A102
f
DRAFT
Register Name: Pixel Number Inquiry
Offset from Base Address: 0x034
Field Bit Description
Pixels Per Frame 0 ... 31 Indicates the total number of pixels per frame.
The value in this register depends on settings in the Format 7, Mode 0
Image Size register (see page 4-28).
Register Name: Total Bytes High Inquiry
Offset from Base Address: 0x038
Field Bit Description
Bytes Per Frame
High
0 ... 31 Indicates the higher quadlet of the total bytes of image data per frame.
The value in this register depends on settings in the Format 7, Mode 0
Image Size and Color Coding ID registers (see page 4-28).
The value in this register includes image data, padding bytes and any
data added by enabled smart features (see Section 6).
Register Name: Total Bytes Low Inquiry
Offset from Base Address: 0x03C
Field Bit Description
Bytes Per Frame
Low
0 ... 31 Indicates the lower quadlet of the total bytes of image data per frame.
The value in this register depends on settings in the Format 7, Mode 0
Image Size and Color Coding ID registers (see page 4-28).
The value in this register includes image data, padding bytes and any
data added by enabled smart features (see Section 6).
Register Name: Packet Para Inquiry
Offset from Base Address: 0x040
Field Bit Description
Unit Bytes Per
Packet
0 ... 15 Indicates the increment for setting the Bytes Per Packet field of the
Bytes Per Packet register (see page 4-31).
4 = the increment for setting the bytes per packet on the A102f and
A102fc.
Max Bytes Per
Packet
16 ... 31 Indicates the maximum bytes per packet.
4096 = the maximum bytes per packet for the A102f and A102fc.