Mechanical Considerations
Basler A500k Series 5-1
PRELIMINARY
5 Mechanical Considerations
5.1 Camera Dimensions and Mounting Facilities
The A500k camera housing is manufactured with high precision. Planar, parallel, and angular
sides guarantee precise mounting with high repeatability.
A500k cameras are equipped with four M4 mounting holes on the front and two M4 mounting holes
on each side as indicated in Figure 5-1.
A tripod mount is availabe as an option. The Basler part number is 1000014110.
Caution!
To avoid collecting dust on the sensor, mount a lens on the camera immediately
after unpacking it.
!
To Next Page
Loading...
Need help?
General
