Configuring the Camera
Basler A500k Series 4-13
PRELIMINARY
4.2.4.4 Long Exposure Compensation
Purpose: To set long exposure compensation or read the current long exposure compensation
setting. See Section
3.4 for details.
Type: This is a read or write command.
Read Command: Cmd-ID R/W-Flag Data Length Data
0xBD 1 1 -
Response: Cmd-ID R/W-Flag Data Length Data
0xBD 0 1 1 Byte
Write Command: Cmd-ID R/W-Flag Data Length Data
0xBD 0 1 1 Byte
Response: None
Data Format: Byte 1 Low byte of the Long Exposure Compensation setting
Byte 2 High byte of the Long Exposure Compensation setting
Data Range: The Long Exposure Compensation setting can range from 0x46 to 0xA0.
To Next Page
Loading...
