Basic Operation and Features
3-42 Basler A500k Series
PRELIMINARY
3.12 Camera Status
A500k cameras monitor their status by performing a regular series of self checks. The current
status of a camera can be viewed in several ways:
• with the camera configuration tool CCT+. You can use the Camera Status information in the
Camera Information group (see Section 4.1 and the configuration tool’s on-line help).
• with binary commands (see Section 4.2). You can use the Camera Status command to see if
the camera has detected any errors.
• by checking the LED on the back of the camera. If certain error conditions are present, the
LED will blink (see Section 6.1).
To Next Page
Loading...
Need help?
General
