Baumer IDC200 - Page 23

Baumer Description | 3
V1.0 | IDC200 Operating Manual 23
Module: Parameter
Parameter - default value for first code or parameter telegram being read according to user defi-
nition. Multiple modules permitted (8, 16, 32, 64, 128, 240 bytes).
n
permitted in slot 3
Group DataItem Format Direction Description Comment
Parameter Parameters at different amounts of bytes (8, 16, 32, 64, 128, 240)
Length UINT16 PLC → Sen-
sor
Effective length of user
data in Data.
Data Octet[X] PLC → Sen-
sor
Parameter - default
value for first code or
parameter telegram be-
ing read according to
user definition / (→
GUI).
several modules
possible (8, 16, 32,
64, 128, 240 bytes)
HS OUT Handshake output data (data as above).