Training of the personnel
Operation manual b maXX BM4100 (NWR)
Document no.: 5.04052.09 Baumüller Nürnberg GmbH
14
of 142
2.6
2.6 Training of the personnel
In these instruction handbook, the following qualifications are stipulated for various areas
of activity:
m Operating personnel
n The drive system may only be operated by persons who have been specially trained,
familiarized and authorized.
n Troubleshooting, maintenance, cleaning, maintenance and replacement may only
be performed by trained or familiarized personnel. These persons must be familiar
with the instruction handbook and act accordingly.
n Initial operation and familiarization may only be performed by qualified personnel.
m Qualified personnel
n Electrical engineers authorized by Baumüller Nürnberg GmbH, and qualified electri-
cians of the customer or a third party who have learned to install and maintain
Baumüller drive systems and are authorized to ground and identify electrical power
circuits and devices in accordance with the safety engineering standards of the com
-
pany.
n Qualified personnel have had occupational training or instruction in accordance with
the respective locally applicable safety engineering standards for the upkeep and
use of appropriate safety equipment.
WARNING!
Risk of injury due to insufficient qualifications!
Improper handling can lead to significant personal injury and material damage.
Therefore:
m Certain activities can only be performed by the persons stated in the respective
chapters of these instruction handbook.
To Next Page
Loading...
Need help?
General
