47
of 142
Operation manual b maXX BM4100 (NWR)
Document no.: 5.04052.09
5TRANSPORT AND PACKAGING
5.1 Safety notes for transport
5.2 What to observe when transporting
For initial transport of the device, it is packed at the manufacturer. If the device is to be
further transported, ensure that the following conditions are met throughout the entire
transport:
m Climate class 2 K 3 as per EN 60721-3-2
m Temperature range - 30 °C up to + 70 °C
m Vibration, shock, continuous shock class 2 M 1 as in EN 60721-3-2
NOTICE!
Damage due to unauthorized transport!
Transport handled by untrained personnel can lead to a substantial amount of mate-
rial damage.
Therefore:
m The unloading of the packages upon delivery as well as the in-house transport
should only be done by trained personnel.
m Contact Baumüller Nürnberg GmbH sales office if necessary.
WARNING!
Danger of mechanical hazard!
Secure devices against falling down.
Therefore:
m Take suitable measures, such as supports, hoists, straps, etc., to ensure that de-
vices cannot fall down.
m Use appropriate handling material.
To Next Page
Loading...
Need help?
General
