Baumuller b maXX 4100 Series - Drilling Patterns; Drilling Pattern BM4135

Mounting
Operation manual b maXX BM4100 (NWR)
Document no.: 5.04052.09
53
of 142
6
6.2.1 Drilling patterns
Use the drilling pattern to make the necessary drill holes/cutout sections.
How to determine the required space in the control cabinet, see ZDimensions– from
page 23.
Tolerance
specifications
Figure 17: Drilling pattern BM4135
NOTE!
Consider the minimum clearances for cooling when making the drill holes.
All dimensions in millimeters [mm].
Further notes see ZDimensions– from page 23 and ZCooling– from page 29.
Drill hole dimensioning ±0.2 mm
Dimensioning openings +1.0 mm
Relative tolerance of discretionary divisions ±0.1 mm