Safety notes
Operation manual b maXX BM4100 (NWR)
Document no.: 5.04052.09 Baumüller Nürnberg GmbH
60
of 142
7.1
WARNING!
Danger because of faulty installation and initial commissioning!
Installation and commissioning require qualified personnel with adequate experi-
ence. A installation fault can cause danger situations or large damage of property.
Therefore:
m Only personnel from manufacturer or qualified personnel operate while installation
and initial commissioning
DANGER!
Risk of fatal injury from electrical current!
Inevitably, when operating this electrical device, certain parts of it are energized with
hazardous voltage.
Therefore:
m Pay heed to areas on the device that could be dangerous during the electrical in-
stallation.
m Pay heed to areas on the device that could still be electrically energized after op-
eration.
Figure 22: Hazard areas during electrical installation
To Next Page
Loading...