Bay Networks BayStack 350 - TELNET Configuration

To Next Page

To Previous Page

Using the Console Interface

304376-B Rev 00

3-67

TELNET Configuration

The TELNET Configuration screen (Figure 3-30) allows a user at a remote

console terminal to communicate with the BayStack 350 switch as if the console

terminal were directly connected to it. You can have up to four active TELNET

sessions at one time.

Choose TELNET Configuration (or press t) from the main menu to open the

TELNET Configuration screen.

Figure 3-30. TELNET Configuration Screen

Table 3-26 describes the TELNET Configuration screen fields.

TELNET Configuration

TELNET Access: [ Enabled ]

Inactivity Timeout: [ 15 minutes ]

Event Logging: [ All ]

Allowed Source IP Address Allowed Source Mask

------------------------- -------------------

[ 0.0.0.0 ] [ 0.0.0.0 ]

[ 255.255.255.255 ] [ 255.255.255.255 ]

Use space bar to display choices, press <Return> or <Enter> to select choice.

Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

kombk.book Page 67 Thursday, February 18, 1999 10:59 AM