Preface
304376-B Rev 00
xxi
Text Conventions
This guide uses the following text conventions:
Acronyms
This guide uses the following acronyms:
bold text
Indicates command names and options and text that
you need to enter.
Example: Enter
show ip
{
alerts
|
routes
}.
Example: Use the
dinfo
command.
italic text Indicates file and directory names, new terms, book
titles, and variables in command syntax descriptions.
Where a variable is two or more words, the words are
connected by an underscore.
Example: If the command syntax is:
show at
<
valid_route
>
valid_route
is one variable and you substitute one value
for it.
screen text Indicates system output, for example, prompts and
system messages.
Example:
Set Bay Networks Trap Monitor Filters
[Enter] Named keys in text are enclosed in square brackets.
The notation [Enter] is used for the Enter key and the
Return key.
[Ctrl]-C Two or more keys that must be pressed simultaneously
are shown in text linked with a hyphen (-) sign.
AUI attachment unit interface
BootP Bootstrap Protocol
(continued)
kombk.book Page xxi Thursday, February 18, 1999 10:59 AM
To Next Page
Loading...