Bay Networks BayStack 350 - Figure 3-37. Bay Networks Logo Screen; Reset to Default Settings

Using the BayStack 350 10/100/1000 Series Switch
3-78
304376-B Rev 00
Figure 3-37. Bay Networks Logo Screen
Upon successful completion of the power-up self-tests, the switch is ready for
normal operation.
To access the BayStack 350 Main Menu, press [Ctrl]-Y.
Reset to Default Settings
The Reset to Default Settings option (accessed from the main menu) allows you to
reset the BayStack 350 switch and replace all configured switch parameters with
the factory default settings. For a list of the factory default settings, see
Appendix E, “Default Settings.”
Caution:
If you choose the Reset to Default Settings command, all of your
configured settings will be replaced with factory default settings when you
press [Enter].
***********************************************
* Bay Networks,Inc. *
* Copyright (c) 1996,1998,1999 *
* All Rights Reserved *
* BayStack 350- XX T *
* Versions: HW:Rev x FW:V x . xx SW:V x . x.x.x *
***********************************************
Enter Ctrl-Y to begin.
kombk.book Page 78 Thursday, February 18, 1999 10:59 AM