Using the BayStack 350 10/100/1000 Series Switch
3-74
304376-B Rev 00
Display Event Log
This section describes the various functions of the Event Log screen
(Figure 3-32
).
Choose Display Event Log (or press e) from the main menu to open the Event Log
screen.
Figure 3-32. Event Log Screen
The Event Log screen provides the following information:
• Software download: Indicates the new software version.
• Authentication failure: Indicates any attempted SNMP
get
or
set
access that
specified an invalid community string.
Note:
This screen does not refresh dynamically to show new entries. To
refresh the screen, press [Ctrl]-P.
Event Log
Entry Number: 4 sysUpTime: 00:14:36 Reset Count: 2
Connection logout, IP address: 38.227.40.8, access mode: no security.
Entry Number: 3 sysUpTime: 00:13:35 Reset Count: 2
Connection logout, IP address: 38.227.40.8, access mode: no security.
Entry Number: 2 sysUpTime: 00:00:53 Reset Count: 2
Successful connection from IP address: 38.227.40.8, access mode: no security.
Entry Number: 1 sysUpTime: 00:00:00 Reset Count: 1
Software downloaded to BayStack Model 450-24T HW:RevA FW:V1.00 SW:V1.0.0.0
Press Ctrl-P to see previous display. Press Ctrl-N to see more entries.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
kombk.book Page 74 Thursday, February 18, 1999 10:59 AM
To Next Page
Loading...