Bay Networks BayStack 350 - Figure 3-39. Bay Networks Logo Screen after Resetting to Factory Default Settings

Using the Console Interface
304376-B Rev 00
3-81
Figure 3-39. Bay Networks Logo Screen After Resetting to Factory Default Settings
Upon successful completion of the power-up self-tests, the switch is ready for
normal operation.
To access the BayStack 350 Main Menu, press [Ctrl]-Y.
Note:
The Self-Test screen remains displayed only if the self-test detects a
fatal error.
***********************************************
* Bay Networks,Inc. *
* Copyright (c) 1996,1998,1999 *
* All Rights Reserved *
* BayStack 350- XX T *
* Versions: HW:Rev x FW:V x . xx SW:V x . x.x.x *
***********************************************
Enter Ctrl-Y to begin.
kombk.book Page 81 Thursday, February 18, 1999 10:59 AM