Bay Networks BayStack 350 - Figure 3-40. Password Prompt Screen; Logout

Using the BayStack 350 10/100/1000 Series Switch
3-82
304376-B Rev 00
Logout
The Logout option (accessed from the main menu) allows a user working at a
password-protected console terminal or in an active TELNET session to terminate
the session.
The Logout option works as follows:
• If the user is accessing the BayStack 350 switch through a TELNET session,
the Logout option terminates the TELNET session.
• If the user is accessing the BayStack 350 switch through a password-protected
console terminal (connected to the console/comm port on the switch), the
Logout option displays the console-terminal password prompt (Figure 3-40
).
The user must enter the correct password to access the CI screens.
Figure 3-40. Password Prompt Screen
You can specify whether a password is required for the TELNET session or the
console terminal using the Console/Comm Port Configuration screen (see
“
Console/Comm Port Configuration” on page 3-54).
If the console terminal is not password protected, the system ignores the Logout
option.
BayStack Model 350-24T HW:Rev x FW:V x . xx SW:V x.x.x.x
Password: [ *************** ]
Enter Password:
kombk.book Page 82 Thursday, February 18, 1999 10:59 AM