8 Test Equipment and Tools
8 - 2 Infusomat® compact
plus
P 1.0
EN
For internal use, only
SPECIAL TOOLS Designation Order No.
Torque Screw Driver Set AIS. . . . . . . . . . . . . . . . . . . . . . . . 10129AIS
with:
Torque screwdrivers 0,10-0,34 / 0,30-1,20 /
1,20-3,00 Nm
Bit 6iPx89 / TX8x89 / 8iPx89 / TX10x89 / 15iPx89 / 10iPx89 /
TX20x89 / TX25x89 / TX30x89
Countersink with handle Ø4,3mm
Tool shank 1/4"x100mm
Wrench socket 1/4" SW8
Slot bit 2,5x70
Angle hinge & socket wrench accessory connector CP
For ordering the torque screwdriver set and for further queries,
please exclusively contact:
WERMAS Werkzeughandels GmbH
Justus-Liebig-Str. 1, 34253 Lohfelden, Germany
Tel. +49 5615 7069-0
Fax +49 5615 7069-29
www.wermas.de
E-Mail: euler@wermas.de
(Every part of the set can be ordered as a single part from Wermas)
Test equipment set AIS . . . . . . . . . . . . . . . . . . . . . . . . . 10129STSAIS
with:
1x TANOS case
1x Foam insert set, removable
For safe transport and storage of the calibration gauges.
Test and calibration gauges have to be ordered separately from
B.
Braun. They are not included in the Test equipment set AIS.
Fig. 8 - 1 Torque Screw Driver Set AIS
To Next Page
Loading...