59
• Certain mobile devices are unable to access 5G Wi-Fi signals due to hardware limitations. If your
mobile device is unable to connect to the Host via Wi-Fi, select Enable in the 2.4G Enable field.
• Both 2.4G Enable and 5G Enable can be enabled at the same time.
• Device Isolate - This option when enabled allows you to block communication between
the devices. connected to the Host's network, including Buttons, PCs, and mobile devices
as a security precaution.
• ATF (Air Time Fairness) - This option allows you to enable or disable ATF which allows
faster clients to have more airtime than slower clients in order to boost the overall
network performance. However, this may make slower clients even slower.
• Band Steering - This option allows you to enable or disable Band Steering which is
a feature that balances dual-band capable wireless clients to connect to the faster
5GHz Wi-Fi, and leave the 2.4GHz Wi-Fi less-crowded for those clients who support
2.4GHz only in order to improve the Wi-Fi performance for all the clients. When using
Band Steering you will only have one SSID ("VS20_XXXXXX") with one password to
connect to.
Press Apply to save any change to the Setting fields.
Wi-Fi Radio Setup
The Wi-Fi Radio Setup sub-menu includes the following additional settings for the Host's
Wi-Fi signal:
• Transmission Power - This field allows you to set the strength of the Wi-Fi signal with the
following options:
-
Heavy - This option sets the Wi-Fi signal to a strong signal strength (10 dbm for 2.4G;
16 dbm for 5G).
-
Standard - This option sets the Wi-Fi signal to a standard signal strength (7 dbm for
2.4G; 13 dbm for 5G).
-
ECO - This option sets the Wi-Fi to a weaker, energy saving signal strength (1 dbm for
2.4G; 7 dbm for 5G).
• 2.4G Channel - This field allows you to choose how the Host selects the wireless channel
for its 2.4G signal. Select Auto to have the host select the 2.4G wireless channel with the
best performance or manually select the channel that you want the signal to be set at.
• When Auto is selected in this field, the 5G Channel will also automatically be switched to Auto.
After switching, you can still manually change the 5G Channel setting to another channel.
• When a specific channel is selected in this field, the 5G Channel will automatically be switched
to its current channel. After switching, you can still manually change the 5G Channel setting to
another channel.
• 2.4G Channel Width - This field allows you to choose either a 20MHz or 40MHz width for
the 2.4G signal.
• 2.4G Mode - This field lists the Wi-Fi standard for the 2.4G signal.
• 5G Channel - This field allows you to choose how the Host selects the wireless channel
for its 5G signal. Select Auto to have the host select the 5G wireless channel with the
best performance or manually select the channel that you want the signal to be set at.
To Next Page
Loading...
