13
bernette
SEWING MACHINE WORK
BOOK
a b c
Securing Stitches
Straight Stitch/Reverse (a)
1.
Place one fabric piece under the presser foot, aligning the
6” cut edge with the 5/8” guide line on the stitch plate.
2. Select the straight stitch. Sew a few stitches forward,
then press and hold the Quick Reverse Button on the
machine as you sew a few stitches backward; the
machine will sew in reverse until the Quick Reverse
Button is released.
3. Continue stitching the seam; secure the end in the
same way.
Securing Program (b)
1. Select the Securing Program #5. Begin to sew on 2nd
piece of fabric; the machine will automatically take six
straight stitches forward and back at the beginning to
secure the stitching.
2. At the end of the seam while the machine
is still stitching, press and release the
Securing button. The machine will
automatically take ve stitches backward, ve stitches
forward to secure the stitching, and then stop.
Quilter's Securing Program (c)
1. Select the Quilting Securing Program #1001. Begin
to sew on 3rd piece of fabric; the machine will take
5 short stitches forward automatically when sewing is
started. Then continue stitching forward.
2. At the end of the seam, press and release
the Securing button. The machine will take
5 short stitches forward to secure and then stop.
HOW
Do you know how to:
• Activate the Securing Function at the
beginning and end of a stitching pattern?
Firm fabric, 4” x 6”, three pieces;
fold in half lengthwise to 2” x 6”
80/12 Universal
Polyester or cotton embroidery thread
Center
Zigzag Sole (DA)-Dual Feed Engaged
(a)
(b)
(c)
To Next Page
Loading...
