24
bernette
SEWING MACHINE WORK
BOOK
Stretch Stitch
1. Attach Zigzag Sole (DA) to the machine and engage
the Dual Feed mechanism.
2. Select the Super Stretch Stitch #11.
3. Place the fabric pieces right sides together.
4. Position the edge of the fabric on the 5/8” marking on
the stitch plate.
5. Sew the seam.
NOTE:
If the fabric is pulling and stretching as
it is sewn, adjust the Presser Foot Pressure on
screen to a lower number to lighten the pres-
sure of the foot on the fabric and eliminate the
stretching.
Spandex, 4” x 6”, two pieces
80/12 Universal (Ballpoint or Stretch
may also be used)
Polyester or cotton sewing thread
As programmed
Zigzag Sole (DA)-Dual Feed Engaged
HOW
Do you know how to:
• Adjust the presser foot pressure?
• What fabric types you would use with
this stitch?
To Next Page
Loading...
