21
bernette
SEWING MACHINE WORK
BOOK
Vari-Overlock Stitch
1. Attach Overlock Sole DI to the machine and engage
the Dual Feed Mechanism.
2. Select the Vari-Overlock Stitch #3.
3. Engage the Needle Stop Down function..
4. Guide the raw edges of the fabric against the black
guide on the foot and stitch the two layers together.
The stitch will form over the pin and the edge of the
fabric.
Notes:
Using the Overlock Foot and the Vari-Overlock Stitch will
keep the edge of the fabric at, not rolled.
This can be used as a seam nish on wovens, or as an actual
seam on knit fabrics.
Other stitches that work with this presser foot are the
Stretch Overlock Stitch and the Double Overlock Stitch.
When you select this stitch, and then select Presser Foot
Sole Display, the Overlock Sole DI will be displayed with a
green check indicating that it is the recommended presser
foot for the stitch.
Cotton interlock, 4” x 6”, two pieces
80/12 Universal
(Ballpoint or Stretch may also be used)
Polyester or cotton embroidery thread
As programmed
Overlock Sole (DI)-Dual Feed Engaged
HOW
Do you know how to:
• Engage the Needle Stop Down feature?
• Position Overlock Foot on the fabric?
To Next Page
Loading...
