20
bernette
SEWING MACHINE WORK
BOOK
Triple Straight Stitch
Notes:
The Triple Straight Stitch creates a very sturdy seam on
items that will receive a lot of wear.
It also creates beautiful bold topstitching with regular
weight thread that mimics the look of a heavier decorative
topstitching thread.
Triple Straight Stitch Seam
The triple straight stitch is optimal for reinforced seams
in heavy fabrics.
1. Attach Zigzag Sole DA to the machine and engage the
Dual Feed Mechanism.
2. Select the Triple Straight Stitch #6.
3. Place the fabric pieces right sides together.
4. Position the edge of the fabric along the 5/8” mark on
the stitch plate.
5. Sew the seam and press it open.
Triple Straight Stitch Edgestitching
1. Adjust the needle position to the far right.
2. With the right side of the fabric up, place the right
edge of the foot along the ditch of the seam. Sew the
length of the seam from top to bottom (1st Line).
3. Adjust the needle position to the far left.
4. Stitch a second time with left side of the foot along the
ditch of the seam. Sew in the same direction as before
(2nd Line).
Firm woven fabric, 4” x 6”, two pieces
80/12 Universal
Polyester or cotton embroidery thread
As directed in instructions
Zigzag Sole (DA)-Dual Feed Engaged
HOW
Do you know how to:
• Adjust the needle position?
• Adjust the stitch length?
1st Line
2nd Line
To Next Page
Loading...
