31
bernette
SEWING MACHINE WORK
BOOK
Combi Mode-Lettering
Firm woven fabric, 4” x 6”
Lightweight tear-away stabilizer 4” x 6”
80/12 Universal
Polyester or cotton embroidery thread
Default
Embroidery Sole-Sewing (JK)
Stitching a word combination:
1. Close the Transition window.
2 Open the "i" menu; select Edit the Complete
Combination. Then touch Pattern Repeat 1x and stitch
the design.
3. Save the combination using the instructions on Page
19 for accessing and programming the memory.
1. Attach
Embroidery Sole-Sewing (JK)
.
2. Place the stabilizer behind the fabric.
3. Open Combi Mode. (If a previous combination is on the
screen, delete the combination. See previous page for
directions.)
4. Select the Alphabet menu and select the rst alphabet.
5. Program CREDTE (purposely misspelled).
6. To edit:
• The cursor is the dot. Select the incorrect letter "D"
in the list using the arrows. (You can also touch the
incorrect letter directly on the display.) Select the
Information icon; touch the Delete (trashcan) icon.
Close the display.
• To insert the "A", select the letter before the insertion
point ("E" in this example) and type the "A". The
insertion happens after the cursor.
Using the Transition window to enter and edit text
1. Open Combi Mode. (If a previous combination is on the
screen, delete the combination. See previous page for
directions.
2. Select the Alphabet menu and select the rst alphabet.
3. Touch the Transition icon to open the Transition
Window and type in CREDTE (purposely misspelled).
4. To edit in the Transition view:
• Touch the incorrect "D" and select the Delete icon
to the right.
• To insert the "A", select the letter before the insertion
point ("E" in this example) and type the "A" to spell
the word CREATE.
• Select Transition icon to close the display.
To Next Page
Loading...
