18
bernette
SEWING MACHINE WORK
BOOK
Altered Stitches
Row 1
Programmed
settings
Row 2
4 mm width
3 mm length
Row 3
4 mm width
Default length
1. Attach Embroidery Sole JK.
2. Place the stabilizer behind the fabric.
3. Select Blanket Stitch #1008 from the Quilting Stitches
menu.
4. Sew a row of stitches. (Row 1)
5. Adjust stitch width to 4 mm and stitch length to 3mm.
Sew a second row of stitching next to the rst. (Row 2)
6. Touch the stitch length numeric value on screen. Tap
the yellow highlighted box to revert the stitch length to
the machine default stitch length setting of 2.5. Leave
the stitch width at 4.0 mm.
7. Sew a third row of stitching next to the previously sewn
rows. (Row 3)
8. Leave this stitch on the screen and go to the next page.
Firm woven fabric, 4” x 6”
Lightweight tear-away stabilizer 4” x 6”
80/12 Universal
Polyester or cotton embroidery thread
Default
Embroidery Sole-Sewing (JK)
HOW
Do you know how to:
• Find the Quilting Stitch menus on your
model?
• Reset the stitch length and width to the
preprogrammed settings?
To Next Page
Loading...
