Bernina 710 - Display

30
Functions
«Start/Stop»-button
 starts and stops the sewing computer when
operating it with or without foot control
 starts and stops the BSR-Function if the BSR
foot is attached and activated
«Presser foot position»-button
⦁
touch button
►
the presser foot is lowered and lifted to a
hover position to position the material easily
►
the presser foot is lowered on the material
while starting to sew
⦁
press the button again
►
the foot is lifted
«Quick reverse»-button
 secures the seam beginning and end: sews in
reverse as long as the button is pressed
 used to program the buttonhole length
 used to program the darning length
 used to determine end of stitching in straight
stitch Securing stitch No. 5
 used for securing in Quilters securing program
No. 1324
«Automatic thread cutter»-button
 upper and lower threads are automatically cut
 2-6 securing stitches can be programmed in
the setup program. These are sewn before the
thread is cut
Speed control
 sewing speed is infinitely variable with the
slide
«Needle stop»-button
⦁
touch button
►
the needle is raised or lowered in the same
way as by sinking the heel back on the foot
control
Programmable «Pattern end/Securing»-button
⦁
touch button before or during sewing
►
single pattern is secured at the end, with the
selected number of stitches programmed
⦁
touch button before or during sewing of a
combination
►
the active pattern of the combination is
secured at the end, with the selected number
of stitches programmed
⦁
the number and type of the securing stitches
can be programmed in the setup program
Functions
Overview «Function»-buttons sewing
033805.51.04_2014-02_Manual_B710_EN