Bernina 710 - Altering Stitch Width and Stitch Length

65
Practical stitches
1
2 3
Altering stitch width and stitch length
Altering needle position
⦁
touch «Moving»-buttons for needle position or
⦁
touch «i»-icon
⦁
touch «Needle position»-icon
⦁
keep «Moving»-buttons or arrow icons pressed
►
quick movement of the needle
⦁
move the bar in the Display using the finger
11 needle positions in total (5 left, 5 right, 1 center = 0).
⦁
turn the knobs or
⦁
touch stitch width or stitch length Display
⦁
touch the arrow icons in the respective Display or
⦁
move the round knob in the Display using the finger
Can be altered while sewing.
When sewing practical or quilting stitches the actual stitch length 1 is displayed.
With other stitch patterns, including alphabets, the overall length of a stitch
pattern 2 is displayed. The actual stitch length 3 is visible when the stitch
length Display is opened.
033805.51.04_2014-02_Manual_B710_EN