75
Practical stitches
Reverse pattern foot No. 1C
Securing program No. 5
for all fabrics
secures beginning and end of seam
Sewing long seams with straight stitch
Even securing by defined stitch count.
Beginning to sew
⦁
press the foot control
►
the sewing computer secures automatically when beginning to sew
(5 stitches forward, 5 stitches in reverse)
⦁
sew seam with straight stitches in desired length
Ending the seam
⦁
press «Quick reverse»-button
►
the sewing computer secures seam automatically (5 stitches in reverse,
5 stitches forward)
►
the sewing computer stops automatically at the end of the securing
program
Securing program
Darning foot No. 9 (optional accessory)
Basting stitch No. 30
for work which requires a very long stitch
basting seams, hems, Quilts etc.
temporary joining
easy to remove
Preparation
⦁
lower the feed dog
⦁
pin work at a right angle to basting direction
►
to prevent the layers from slipping
Basting
⦁
place fabric under the presser foot
⦁
hold the threads while sewing the first stitch
⦁
pull work from behind to the required length of the stitch
⦁
sew one stitch
⦁
repeat the procedure
Securing/fixing the thread
Lower feed dog, sew 3-4 securing stitches at the begin and at the
end.
Thread
Use a fine darning thread for basting as it is easier to remove.
Basting stitch
033805.51.04_2014-02_Manual_B710_EN
To Next Page
