Bernina 710 - Stitch Width and Stitch Length Knobs (Multifunction); Needle Position-Buttons; Needle Stop Position up and Quick Reverse- Button; Needle Stop Position down and Quick Reverse-Button

31
Functions
Stitch width and Stitch length Knobs
(Multifunction)
 to adjust stitch width or stitch length
 to alter thread tension
 to set the buttonhole slit width or the button
size
 to adjust the balance
 various alterations in the setup program
«Needle position»-buttons
⦁
press the left button
►
needle moves to the left
⦁
press the right button
►
needle moves to the right
⦁
keep button pressed
►
quick change
 total of 11 needle positions (5 left, 5 right,
1 center = 0)
Needle stop position up and «Quick Reverse»-
button
If the «Quick Reverse»-button is pressed while
sewing or after stopping (e.g. zig-zag) with
programmed needle stop up, the sewing
computer sews one stitch forward before it
switches to sewing in reverse.
Needle stop position down and «Quick
Reverse»-button
If the «Quick Reverse»-button is pressed after
stopping (e.g. zig-zag) with programmed needle
stop down, the sewing computer switches to
sewing in reverse immediately.
033805.51.04_2014-02_Manual_B710_EN