Bernina 710 - Sewing settings

44
Setup Program
21 3
5 6 7
10 119
4
8
Setup Program
Overview «Setup»-display
The Setup Program enables an individual adjustment of the
Display surface and the settings according to your personal
requirements.
After setting the sewing computer to your personal requirements,
all changes made in the Setup Program are saved, even when
the sewing computer is switched off.
Exceptions from this rule are outlined within the description of the
function concerned in each case.
⦁
touch «Setup Program»-button
►
«Setup Program»-display is opened
1 Display settings
2 Display color
3 Sewing settings
4 Winding speed
5 Display calibration
6 Audio System
7 Monitoring
8 Information
9 Update sewing computer
10 Calibration buttonhole foot No. 3A/Cleaning
11 Basic setting
033805.51.04_2014-02_Manual_B710_EN