34
Functions - Display
Needle stop up/down
⦁
touch icon
►
the arrow on the Display points down
►
the sewing computer stops with needle down
⦁
touch the icon again
►
the arrow on the Display points up
►
the sewing computer stops with needle up
Pattern begin
►
the function appears when the sewing computer is
stopped while sewing a single stitch or a stitch
combination
⦁
touch icon
►
the needle moves to the beginning of a stitch
pattern or program
Securing
⦁
touch icon before sewing
►
the single stitch is secured with four stitches at the
beginning
⦁
touch icon while sewing a single pattern
►
the single stitch is secured at the end
►
the sewing computer stops
⦁
to program the securing function within a stitch
combination
⦁
any single stitch of the combination can be secured
at the begin or at the end
Functions - Display
Overview Sewing functions
⦁
touch «i»-icon
►
«Function»-display appears
Information
⦁
touch icon
►
another Display is opened
Back
⦁
touch icon
►
goes back to the previous Display
►
all changes are saved
Confirm selection
⦁
touch icon
►
activates or confirms alteration/selection
Leaving the active Display
⦁
touch icon
►
the Display is closed
►
goes back to the previous Display
General functions
Functions
1 Needle stop up/down
2 Pattern begin
3 Securing
4 Pattern repeat
5 To alter pattern length
6 Upper thread tension
7 Needle position
8 Mirror Image (Left/Right)
9 Personal memory permanent
10 Security program
11 Mirror image (Up/Down)
12 Clear saved setting to default
13 Presser foot indicator
14 Permanent reverse sewing
15 Balance
16 Presser foot pressure
3
7
4 65
8 9 10
11 12 13
15 1614
2
1
033805.51.04_2014-02_Manual_B710_EN
To Next Page
