Bernina 710 - Table of Contents

4
Contents
Contents
Safety Instructions 2
Environmental Protection 3
Key to Signs 8
Glossary 8
Accessory 9
Standard Accessoryies 9
Presser feet 10
Accessory box free standing 11
Bobbin 11
Overview sewing computer 12
Front view 12
Detail view 12
Important sewing information 14
Thread 14
Needle, thread and fabric 14
Needles, threads 15
⦁
Correct needle/Thread combination 15
⦁
Too thin thread or too thick needle 15
⦁
Too thick thread or too fine needle 15
Overview needles 16
Sewing preparation 18
Power Switch/Power Cable 18
Foot control 18
Slide-on table 18
Presser foot lifter 19
Vertical spool pin 19
Winding a bobbin 20
⦁
Bobbin winding while sewing 20
Inserting a bobbin/Threading lower thread 21
⦁
Removing the bobbin from the bobbin case 21
Removing/inserting bobbin case 21
Threading the upper thread 22
Changing the needle 22
Threading the double needle 23
Threading the triple needle 23
Thread needle 24
Changing the presser foot 24
Stitch plate 25
⦁
Markings on the stitch plate 25
⦁
Removing the stitch plate 25
⦁
Replacing the stitch plate 25
Thread tension 26
⦁
Altering the upper thread tension 26
⦁
Saving the upper thread tension 26
⦁
Reset settings 26
Altering presser foot pressure 27
⦁
When sewing thick material, e.g. quilting 27
⦁
Saving presser foot pressure 27
⦁
Reset settings 27
Feed Dog and Fabric Feed 28
Feed Dog lowered/ready to sew 28
Functions 30
Overview «Function»-buttons sewing 30
⦁
«Start/Stop»-button 30
⦁
«Presser foot position»-button 30
⦁
«Automatic thread cutter»-button 30
⦁
«Quick reverse»-button 30
⦁
«Needle stop»-button 30
⦁
Programmable «Pattern end/Securing»-button 30
⦁
Speed control 30
⦁
Stitch width and Stitch length Knobs (Multifunction) 31
⦁
«Needle position»-buttons 31
⦁
Needle stop position up and «Quick Reverse»-
button 31
⦁
Needle stop position down and «Quick Reverse»-
button 31
Display 32
Overview Main Display 32
⦁
System settings 32
⦁
Menu Selection 32
⦁
Selection 33
⦁
Stitch Pattern selection 33
⦁
Stitch Pattern Display 33
Functions - Display 34
Overview Sewing functions 34
General functions 34
Overview Functions buttonholes 36
Overview Functions Alphabets 38
Overview Functions Combi mode 40
Setup Program 44
Overview «Setup»-display 44
Changing Display settings 45
⦁
Brightness 45
⦁
Sewing light 45
⦁
Brightness sewing light 45
⦁
Welcome text 45
⦁
Deleting Welcome text 45
⦁
Corrections 45
Selecting the Display color 46
Sewing settings 46
⦁
Sewing speed 46
⦁
Altering the upper thread tension 46
⦁
Securing stitches at pattern begin 46
⦁
Automatic securing program at pattern end 47
⦁
Automatic thread cutter 47
⦁
Raising the presser foot 47
⦁
Automatic thread cutter and securing stitches 47
⦁
Presser foot position when needle stop down 47
⦁
Presser foot in hover position 47
⦁
Reset settings 47
Display Calibration 48
Altering the winding speed 48
Altering the acoustic signals 49
033805.51.04_2014-02_Manual_B710_EN