Bernina 720 - Making Use of the Height Compensation Tool; Using the Compensation Plate

Buttonholes
104
61 Eyelet with small zigzag Openings for cords or narrow ribbons
and for decorative work.
62 Eyelet with straight stitch Openings for cords or narrow ribbons
and for decorative work.
63 Heirloom buttonhole For handlook stitching effects on clothes
and handicrafts on light to medium-
weight fabrics.
69 Decorative buttonhole with
double pointed bartack
For decorative buttonholes in firmer,
non-elastic fabrics.
9.2 Making use of the height compensation tool
When a buttonhole is to be sewn at right angles to the project edge, it is recommend to use the height
compensation plates (optional accessory).
> Place the plates from the back between the sewing project and the bottom of the slide to the thick part
of the sewing project.
> Lower the presser foot.
9.3 Using the compensation plate
When sewing a buttonhole in difficult materials, it is recommended to use the Height Compensation Plate
(optional accessory). It can be used in combination with the Buttonhole foot with slide
#3A.
> Insert the compensation plate carefully from the side.