Bernina 720 - Mirroring Embroidery Motifs; Changing the Stitch Type; Altering the Stitch Density

Creative embroidering
148
> To make the embroidery motif wider, turn the «Upper Multi-function knob» clockwise.
> To make the embroidery motif narrower, turn the «Upper Multi-function knob» anti-clockwise.
> To make the embroidery motif longer, turn the «Lower Multi-function knob» clockwise.
> To make the embroidery motif shorter, turn the «Lower Multi-function knob» anti-clockwise.
Mirroring embroidery motifs
Embroidery motifs can be mirror-imaged both vertically and horizontally.
> Select an embroidery motif.
> Tap «i-Dialog».
> To mirror the embroidery motif horizontally, tap «Mirror Image Left/Right».
> To mirror the embroidery motif vertically, tap «Mirror Image Up/Down».
Changing the stitch type
If the satin stitches are too long, they can be changed to step stitches.
> Select an embroidery motif.
> Tap «i-Dialog».
> Tap «Alter Stitch Type/Stitch Density».
1 2
> Touch the switch in the upper section of the display (1) to change the satin stitch to the step stitch.
> Set the stitch length to 2.
Altering the stitch density
If the satin stitches are embroidered too densely, the stitch density can be adjusted.
> Select an embroidery motif.
> Tap «i-Dialog».