Bernina 720 - Rotating Motif; Altering the Embroidery Motif Size Proportionally

Creative embroidering
146
> Turn the «Lower Multi-function knob» to move the embroidery motif vertically in 1/10 mm steps or tap
and hold the embroidery motif to move the embroidery motif as you like.
– The relocation is indicated in the yellow-outlined icons.
> Tap «Center Motif».
– The embroidery motif is repositioned in the center of the embroidery hoop.
Rotating motif
> Select an embroidery motif.
> Tap «i-Dialog».
> Tap «Rotate Embroidery Motif».
> Turn the «Upper Multi-function knob» or the «Lower Multi-function knob» to the right to rotate the
embroidery motif clockwise.
> Turn the «Upper Multi-function knob» or the «Lower Multi-function knob» to the left to rotate the
embroidery motif counter-clockwise.
> To rotate the embroidery motif in 90°-steps, tap «Rotate the embroidery motif +90°».
Altering the embroidery motif size proportionally
Enlargements or reductions of the motif size up to maximum 20% achieve the best results.
If the motif size is to be altered by more than 20%, the motif should be adapted in a separate
embroidery software and then reloaded onto the machine.
> Select an embroidery motif.
> Tap «i-Dialog».
> Tap «Change Motif Size».