EasyManua.ls Logo

Bernina 720 - Wide Edgestitching; Edgestitching Using the Seam Guide

Bernina 720
192 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Practical stitches
91
> Select the left-hand needle position at the desired distance to the edge.
5/8
5/85/8
1
25
15 15
15
75
75
6.14 Wide edgestitching
> Fit the Reverse Pattern Foot#1.
> Tap «Practical Stitches».
> Select Straight stitchNo.1.
> Guide the edge along the presser foot or at a distance of 1–2.5cm along the marks on the stitch plate.
> Select the needle position at the desired distance to the edge.
6.15 Edgestitching using the seam guide
When sewing parallel wider lines, it is recommended to guide the seam guide along the sewn of lines.
> Fit the Reverse Pattern Foot#1.
> Tap «Practical Stitches».
> Select Straight stitchNo.1.
> Loosen the screw on the back of the presser foot.
> Insert the seam guide into the hole in the presser foot.
> Adjust the width as required.
> Tighten the screw.

Table of Contents

Related product manuals