Bernina 720 - Machine Settings; Selecting a Language; Adjusting the Brightness of the Display

Setup Program
59
> Tap «Setup Program».
> Tap «Set Sound».
> To switch all audio signals on or off, tap (1).
> To switch off the sound when selecting a stitch pattern, tap the corresponding «Switch Sounds On/Off»
in area (2).
> To switch on the sound when selecting a stitch pattern, tap the corresponding in area_(2) «1–4».
> To switch off the sound for selecting functions, tap the corresponding «Switch Sounds On/Off» in area
(3).
> To switch on the sound for selecting functions, tap the corresponding in area _(3) «1–4».
> To deactivate the sound of the beeper when using the BSR Modes, tap «Switch Sounds On/Off» in the
sector (4).
3.6 Machine settings
Selecting a language
The User Interface can be programmed in different languages according to the customer's wish because
BERNINA provides a wide range of international languages for the customers. Via firmware updates
additional languages for the User Interface can be provided.
> Tap «Setup Program».
> Tap «Machine Settings».
> Tap «Language Selection».
> Select a language.
Adjusting the brightness of the display
The brightness of the display can be set to meet your individual needs.
> Tap «Setup Program».
> Tap «Machine Settings».
> Tap «Screen Settings».
> Adjust the brightness of the display in the upper section of the screen.