107 of 109
Trace the Design
Tracing the design using the hoop and trace keys simultaneously on the
keypad of the machine will also give you a good idea of where the design
will be sewn.
Watch the Hoop Limits
Depending on the structure of the cap, you will be able to sew within
varying distances from the hoop limits. Softer, thinner, and more pliable
materials will allow you to sew closer to the limit. Tougher and less exible
materials may cause the fabric to ramp up at the teeth causing agging,
needle deection, and thread or needle breaks.
To Next Page
Loading...