94 of 109
7. Pull the side of the sweatband toward the cap frame and down.
Smooth any bunching of the cap sides or sweatband. You may
eventually need to fold the sweatband a bit to avoid the latch-
ing hook. But this will help with the placement of the cap on the
frame. As you do this, watch the backing to ensure it is still in
place.
8. When the left side of the cap is within the strap hinge post, swing
the strap up and over the cap brim. On the side of the cap, the
teeth of the strap should fall just above the seam attaching the
sweatband of to the cap.
9. Continue bringing the strap around the front of the cap. On the
front of the cap, the teeth of the strap must fall into the seam for
the bill.
To Next Page
Loading...