Maintenance
BEUMER stretch hood® S
98 BA-6090103-EN
19.08.09
Inspection list
Interval Subassembly Work / checks to be carried out
Motor:
• Check the cable entries and the temperature.
• Unusual noise during operation? Check the
bearings.
• Clean the cooling fins and air inlet openings.
• Clean the brake and check the working air gap.
Every 700 oper-
ating hours
or monthly
Chain drive
Information on the work to be
carried out in the Maintenance
and Lubrication chapters.
Visual check:
• Does the chain run straight?
• Does the chain sag by more than 1 to 2 % of
the centre distance?
• Can wear and tear be detected on the sprocket
wheels and the chain?
• Is the chain excessively dirty?
• Is the lubricant on the chain sufficient?
To Next Page
Loading...