Electric Actuator ICON2000/ICON2000AD
ADDENDUM G to INSTRUCTION HANDBOOK MAN 618
© Copyright by BIFFI Italia. All right reserved. Page
i
INDEX
1 SAFETY INSTRUCTIONS 2
1.1 General 2
1.2 Identification of main parts 3
2 CHECK FOR RIGHT APLICATION 4
2.1 ATEX and IECEx marking 5
2.2 FM marking for Hazardous (Classified) Location 6
3 APPLICABLE GENERAL STANDARDS AND
REGULATIONS 8
4 TERMS AND CONDITIONS 8
5 MANUFACTURER’S LIABILITY 9
6 STORAGE AND PRE-INSTALLATION 9
6.1 Storage procedure 9
6.2 Checks to be performed before installation 10
7 INSTALLATION 11
7.1 Working condition 11
7.1.1 Models ICON-040 and ICON-050 11
7.1.2 Base unit with extensions [A] or [B] or [C] 11
7.2 Identification of entry 12
7.2.1 Base actuator 12
7.2.2 Base actuator with extensions [A] or [B] on the terminal board compartment 13
7.3 Wiring 14
7.4 Cable connection 14
7.5 Installation in ambient with explosive dusts 16
7.6 Installation in Hazardous (Classified) Location 16
7.7 Safety Instructions for installation in Hazardous (Classified) Location 17
7.7.1 Basic Instructions for the explosion proof electrical equipment 17
7.7.1.1 Class I Division 1 and 2 17
7.7.1.2 Class III Division 1 and 2 18
7.7.1.3 General recommendation for maintenance in Hazardous Location 18
7.7.2 Installation in ambient with combustible dust Class II 19
7.7.2.1 Class II Division 1 and 2 19
To Next Page
Loading...
