© Copyright by BIFFI Italia. All rights reserved.
Section 618/1
General instructions for installation
INDEX
CHAPTER “A”
GENERAL SAFETY INSTRUCTIONS........................................................................6
1. Range of application..........................................................................6
2. Safety instructions for installation in hazardous area.................................................6
3. Applicable standards and regulations................................................8
4. Terms and conditions.............................................................................................8
CHAPTER “B”
STORAGE AND PRE-INSTALLATION........................................................................9
1. Tests to be carried out when the actuator is received..............................................9
2. Storage procedure..................................................................................................9
3. Checks to be performed before installation............................................................11
CHAPTER “C”
INSTALLATION.......................................................................................................13
1. Working condition..............................................................................13
2. Coupling block: disassembly from the actuator.......................................................13
3. Manual operation.......................................................................................17
4. Mounting the actuator onto the valve.......................................................................18
5. Electrical connections.................................................................................20
6. Removing the terminal board enclosure......................................................20
7. Cable entries............................................................................................21
8. Terminal board.........................................................................................................22
9. Instructions for the explosion-proof enclosures....................................................23
10. Installation in environment with explosive dusts...............................................23
CHAPTER “D”
LUBRICATION.............................................................................................................25
1. Lubrication inspection.............................................................................................25
5
“ICON2000”
instruction and operating manual
Section 618/1
Section 618/1
To Next Page
Loading...
