Electric Actuator ICON2000/ICON2000AD
ADDENDUM G to INSTRUCTION HANDBOOK MAN 618
© Copyright by BIFFI Italia. All right reserved. Page
22
8.3 Repairs
When needed, repair must only be carried out with Manufacturer’s original
spare parts.
Warning
The values of gaps of explosion-proof joints are lower
than the maximum specified on Tables of IEC/EN
60079-1 Standard and the values of widths of the
explosion-proof joints are superior to the values
specified on tables of the Standard IEC/EN 60079-1. In
case the maintenance should require the replacement of
any component which forms part of an explosion-proof
joint, only an original spare provided by BIFFI MUST
be used. Direct repair or reconstruction of the above
components are not permitted without the BIFFI
permission. Not performing this procedure will
invalidate the product safety and contractual guarantee.
Original spare parts must be required to the Manufacturer: to ensure that right
spare is provided, serial number printed on the ICON2000 unit enclosure label
must be specified when spares are ordered.
To Next Page
Loading...
