Biolight V6 User Manual

Vital Signs Monitor User’s Manual
Chapter 4-3
5. TEMP Parameter Area
It is to display temperature parameter. Select “TEMP” to enter【TEMP Setup】
menu.
6. SpO
2
Wave Area
It is to display SpO
2
wave. Select ” SpO
2
Wave” to enter【SpO
2
Wave Setup】
menu.
7. Time and Battery Status Displaying Area
It is to display system time and battery status.
8. Prompt Messages Area
It is to display the menu’s meaning which the cursor is on or prompt messages.
9. Icons Area
From left to right, the icons are【Menu】,【Patient Information】,【Recorder
Setup
】
,
【
Network Setup
】
and
【
SD Card
】
.
10. SpO
2
Parameter Area
It is to display SpO
2
parameters. Select “SpO
2
” to enter【SpO
2
Setup】menu.
11. Physiological Alarm Area
It shows the physiological alarm messages. When multiple alarms of different
levels occur at the same time, the monitor will give visual and audible alarm
indications according to the alarm level.
12. Technical Alarm Area
It shows technical alarm messages. When multiple alarms of different levels occur
at the same time, the monitor will give visual and audible alarm indications according
to the alarm level.

Biolight V6 Specifications

General

Brand	Biolight
Model	V6
Category	Monitor
Language	English