Biolight V6 User Manual

Vital Signs Monitor User’s Manual
Chapter 6-7
 Setting SpHb Average Time
You can select the averaging mode for SpHb value, select【SpHb Average Time】
in the SpO2 parameter setting menu, and you can select【Short】,【Medium】or
【Long】.
 Setting SpHb Precision
You can select the SpHb precision to be displayed on the screen, select 【 SpHb
Precision】in the SpO2 parameter setting menu, and select a proper time as required.
 Setting SpHb Unit
You can select【SpHb Unit】in the SpO
2
parameter setting menu, and select the
unit as required. The options are【g/dL】and【mmol/L】.
6.6 Masimo Information
 Masimo Patents:
This device is covered under one or more of the following U.S.A. patents:
5,758,644, 5,823,950, 6,011,986, 6,157,850, 6,263,222, 6,501,975 and other
applicable patents listed at: www.masimo.com/patents.htm.
 No Implied License
：
Possession or purchase of this device does not convey any express or implied
license to use the device with unauthorized sensors or cables which would, alone, or
in combination with this device, fall within the scope of one or more of the patents
relating to this device.
6.7 Nellcor Information
This is the trademark of Nellcor Puritan Bennett Inc.

Biolight V6 Specifications

General

Brand	Biolight
Model	V6
Category	Monitor
Language	English