Biolight V6 - Prompt Messages

Vital Signs Monitor User’s Manual
17
 CO
2
Alarm messages
Cause
Level
CO
2
sensor off
CO
2
sensor is off patient or off the
monitor.
Low
Check airway adapter
CO
2
airway adapter is disconnected with
CO
2
sensor.
CO
2
measurement over
range
CO
2
measurement is over range and need
verify zero.
Low
Zero Required
Sensor or module is not initialized.
Check CO
2
Sampling Line
Sampling tube is occluded or damaged;
Sampling tube is kinked or pinched；
Exhaust tube is blocked.
CO
2
sensor error
CO
2
sensor is error.
Sensor no initialized
Sensor or module is not initialized.
 Temp
Alarm messages
Cause
Level
Temp Sensorerror1
The temp sensor is error.
Low
Temp Sensorerror2
The temp sensor is error.
Temp OverrangeUp
The measurement value is higher than
43℃.
Temp OverrangeDown
The measurement value is lower than
34℃.
Temp Environment
OverrangeUp
The ambient temp is higher than 40℃.
Temp Environment
OverrangeDown
The ambient temp is lower than 10℃.
Temp Disconnect
The temp probe is disconnected.
C.3 Prompt Messages
 System
Messages
Cause
Level
Recording
Recorder is in printing operation.
No level