Biolight V6 User Manual

V6 Vital Signs Monitor User’s Manual
8
Alarm range
Sys
(0 ～ 300) mmHg ， high/low limit can be adjusted
continuously
Dia
(0 ～ 300) mmHg ， high/low limit can be adjusted
continuously
Map
(0 ～ 300) mmHg ， high/low limit can be adjusted
continuously
A.4.3 CO
2
(LoFlo)
 Microstream CO
2
module
Measurement way
Infrared spectrum
Measurement mode
microstream
Warm up time
Capnogram displayed in less than 15 s, at an ambient temperature of
25℃, full specifications within 2 minutes.
Measurement range
(0~19.7) %（0~150 mmHg）
Resolution
0.1% or 1mmHg
Stability
Short term drift: ±0.8mmHg over four hours
Long term drift: Accuracy specification will be maintained over a 120
hour period.
Unit
%, mmHg, kPa
Accuracy ( 760mmHg，
temperature is 25℃)
0 mmHg to 40 mmHg, ±2 mmHg
41 mmHg to 70 mmHg, ±5% of reading
71 mmHg to 100 mmHg, ±8% of reading
101 mmHg to 150 mmHg, ±10% of reading
(when RR ＞80 rpm, all the range is ±12% of reading)
Gas temperature at 25℃
Total system response
time
＜3s
Sample flow rate and
accuracy
Rate: 50 ml/min
Accuracy: -7.5ml/min～+15ml/min
Alarm range
0%～20.0%(0mmHg～152mmHg ）, high/low limit can be adjusted
continuously.
Alarm accuracy
±0.1% or ±1mmHg
 awRR
Measurement range
0 rpm~150 rpm

Biolight V6 Specifications

General

Brand	Biolight
Model	V6
Category	Monitor
Language	English